Taski Rubber Cleaning, R50, Ultra, Stripper, Sealer Floor, Taski Profi, Vision Matte.

Directions for use:
CLEANING PROCEDURES
1. INITIAL / DAILY CLEANING
a. Remove all surface soil, debris, sand and grit by sweeping, dust mopping or vacuuming with a high CFM vacuum. For large and high traffic areas, use commercial floor scrubbing equipment to clean floors.
b. Scrub floor with a neutral pH (7-9) detergent, such as TASKI profi cleaner (use 6-8 oz/gal of water), using a buffer or auto scrubber with a soft nylon brush or a contact pad.
c. Pick up the dirty solution with wet vacuum.
d. Rinse with clean water, picking up the rinse water with a wet vacuum.
e. Repeat until the removed rinse water is clear. f. Allow to dry thoroughly (6-8 hours).
2. HEAVY SOIL
a. Same as 1. INITIAL / DAILY CLEANING except use higher concentrations of neutral cleaner (such as Taski profi at minimum concentration of 15 oz. per gallon of water).
MAINTENANCE
c. Pick up the dirty solution with wet vacuum.
d. Rinse with clean water, picking up the rinse water with a wet vacuum.
e. Repeat until the removed rinse water is clear.
f. Allow to dry thoroughly (6-8 hours).
Cleaning & maintenance products: TASKI profi. Coating renewal: Depending upon intensity of traffic and appearance requested, the basic treatment can be renewed as follows: Application: - Scrub with TASKI profi - 2 oz./gal - Rinse and let floor dry - Mop on TASKI vision matte.
Stripping: After 1 year, a stripping job may be necessary.
Application: - Spread out a solution of Action No-Rinse Stripper (8-10 oz./gal) - Let it act for 10 minutes. - Scrub with floor machine and soft nylon brush. - Remove with wet vacuum and rinse. After the floor is dry, mop on a new coating of TASKI vision matte.

TASKI PROFI
Cleaning
Rubber flooring needs special treatment from the very first day. The manufacturers of such floorings treat their product with a silicon/paraffin wax compound. This protection film must be removed before the floor is used - otherwise, it will attract and lock in dust and dirt. PROFI - neutral stripper Rubber floorings are highly sensitive to strippers with a high pH value. Profi is neutral with a pH of 8, and is the perfect and safe product for thorough yet convenient removal of silicon and paraffin coatings. Profi is a neutral ph degreaser. Always test a little bit on your floor before using on the entire floor.
1 Gallon - $21.57 Material Safety Data Sheet
4X1Gallon - case- $86.28 Material Safety Data Sheet

TASKI VISION MATTE
Floor Finish
Silky-matte shine floor finish/sealer. TASKI Vision Matte floor finish maintains a satin low gloss in areas where high shine is detrimental, e.g., nursing homes, hospitals, synthetic gym floors, etc. Vision Matte is highly recommedned on linoleum and rubber floors, but is also ideal for use on vinyl, PVC, natural and artificial stone floorings, and sealed wood floors. 1000 sq.ft. per gallon coverage. recommended to put 3 coats. This is sealer and has a mat finish - similar to a wax floor finish. Always clean your floor before applying a sealer such as Vision Matte.
1 Gallon each - $24.86 Material Safety Data Sheet
4X1Gallon - case - $99.42 Material Safety Data Sheet